March 14th, 2015
If you are a resident of Thousand Oaks CA who is wondering how to prepare the swimming pool for summer then you have come to the right page. In this article we will take you through a step by step guide for getting your pool ready for summer. Preparing the swimming pool for summer involves a lot more than just filling it up and diving in. In this article we are going to talk about five quick and easy steps which would help the residents of Moorpark CA prepare the pool for summer and also prevent the need for frequent repairs.
1. Get rid of the debris and leaves
At the end of winter you will find leaves, dirt and other weather build ups in and around your pool. Before you remove the cover make sure to clean the surrounding area along with the cover itself. In case there is standing water on the cover then pump the water out or else it would find its way into the pool.
2. Remove the cover
After removing the cover make sure to clean and dry it thoroughly before storage. If you have enough space then you should lay out the cover and hose it off with the highest pressure and then dry it. Before storing you need to sprinkle it with talcum powder so that it doesn’t stick or bind while stored. It’s always better to store the pool cover in a cool area.
3. Checking the water level
For proper functioning of the pump the level of water should be in the middle of the skimmer opening. Therefore the water should be added accordingly. While the pool gets filled you should properly check the handrails, diving boards and ladders for any loose bolts or other perilous conditions.
4. Clean the pump and get it read
Make sure to check and find out if all the equipment are in properly functioning. The pumps, filters and hoses needs to be checked according to the guidelines provided by the manufacturer. Once you start the circulation system, let it run for about 8-12 hours.
5. Checking the pH level of the water
In the fifth and last step you need to check the pH level of the water, its hardness, alkalinity and everything else. Get a pH kit and fill the test tube with water taken from about 18 inches below the surface level. Now you need to take the sample away from the inlet of your pump. Before putting the cap tube a test specific quantity of the agent needs to be added. Make sure not to cover the opening of the test tube with your finger.
Now that you know all the 5 steps to prepare your pool, you need to inspect all the items related to the safety of your pool. Ensure that your cleaning equipment is working properly or that the latch and gate to your pool is secure. If you are unsure of doing it on your own then you can always go for help from a professional pool cleaning company.